Technical Support USA:
(314) 420-2951
Linear drainage
systems
Point drainage
systems
Entrance mat
systems
Steel Grating
Strengthening of ground
Inspection hatches
Systems of internal
drainage
Main > All novelties 2009
Print version   

All novelties 2009


Novelties 2009 | Novelties 2008 | Novelties 2007
Cast-iron mesh grating VCH-50 for drain box Cast-iron mesh grating VCH-50 for drain box

We would like to offer you cast-iron mesh grating VCH-50 for drain box 300x300.


Specifications:


  • Size - 280x280x22 mm;
  • Weight - 3,5 kg;
  • Material - cast-iron VCH-50.

    • Sloped concrete channels MAXI 110, 160, 200 and 300
    Sloped concrete channels MAXI 110, 160, 200 and 300

    There are situations when it is impossible to create a desirable bias by means of a surface, but thus the surface drainage system should be and reliably function. For this purpose trays of series MAXI with hydraulic section of 110, 160, 200 and 300 mm can have an internal bias of the basis of 0,5 %. Due to that water through a sand trap will leave in the storm water drain.


    We bring to your attention sloped concrete channels channels MAXI:


  • Series Maxi DN110 with slope;
  • Series Maxi DN160 with slope;
  • Series Maxi DN200 with slope;
  • Series Maxi DN300 with slope.

    • Complete set: plastic channel series Maxi DN300 with cast-iron grating Complete set: plastic channel series Maxi DN300 with cast-iron grating

    An exclusive offer from national producer for bulding masrket


    Specifications:


  • Width of the hydraulic cross section is 300 mm;
  • Steel reinforcing nozzles;
  • Ductile cast-iron grates with load class E600 (up to 60 t);
  • Weight is only 47,5 kg! - cheap and easy to transport and install;
  • Fixing with bolts, easy to repair;
  • Able to connect with pipes from 160 to 250 mm in diameter;
  • Mounting typy tongue-groove along the perimeter of the cross section with latches.

    • Plastic channel series DN300
    Plastic channel series DN300

    Plastic channel with hydraulic section of 300 mm can be used as waste ditches in road and cottage building. It is easy in transportation and installation, in comparison with similar production from ferro-concrete. For installation of plastic channels the crane and the manipulator are not necessary. Besides, in places of moving of transport, plastic channel provides reliable fastening of a grating from high-strength cast-iron


    Specifications:


  • Width of the hydraulic cross section is 300 mm;
  • Able to connect with pipes having from 160 mm to 250 mm in diameter.


    • Complete set: plastic channel series Maxi DN200 with cast-iron grating
    Complete set: plastic channel series Maxi DN200 with cast-iron grating


    Brief description:



  • Width of the hydraulic cross section is 200 mm;
  • steel reinforcing nozzles;
  • Ductile cast-iron grates with load class E600 (up to 60 t);
  • Weight is only 27,4 kg! - cheap and easy to transport and install;
  • Fixing with bolts, easy to repair.

    • Concrete channel Maxi DN500 Concrete channel Maxi DN500

    Concrete channels series Maxi DN500 are apllied for the drainage of extended surfaces and also at places with abundant rainfalls. They can also be used on hilly surfaces, as trays-interceptors for improvement of city area, or as waste channels for road building.


    Specifications:


  • Load class according to EN-1433 is E 600 (to 60 tonns);
  • Width of the hydraulic cross section of 500 mm.

    • Trash box for channels series Maxi DN500 Trash box for channels series Maxi DN500

    Concrete trash boxes Maxi DN500 are applied as revisory wells at city and industria building.


    Specifications:


  • Load class according to EN-1433 is E 600 (to 60 tonns);
  • Well depth is 2 m;
  • Possibility to connect with collector DU 400 mm.


    • Plastic channel series DN100 H200
    Plastic channel series DN100 H200

    Specification:


  • Hydraulic cross cestion of 100 mm;
  • The increased throughput at the expense of depth of product H200 mm;
  • Weight - 2,9 kg! Easy to transport and install.

    • Concrete channel series DN100 H60
    Concrete channel series DN100 H60

    Concrete channels in height of 60 mm are applied to water drainage in territories adjoining to apartment houses, children's playgrounds, foot zones.


    Specifications:


  • Length of a product - 0,5 m;
  • Height of 60 mm;
  • Lock presence "tongue - groove";
  • Manufacture method: vibropressing.

    		•